The welding process of Cheapest Square Welded Nut products!

Cheapest Square Welded Nut products are nuts suitable for welding on the outside of the nut. They are generally made of weldable materials and thicker and suitable for welding. After melting, they are mixed together and then cooled. The alloy is added in the middle. The internal is the function of molecular force, and the strength is generally greater than that of the parent body.
The experiment of welding parameters depends on the fusion size of the weld, and the welding parameters are adjusted according to the fusion size until the defect is eliminated. Of course, the quality of welding is related to the pre-welding treatment, such as dust removal and oil stains.

The protective gas of Cheapest Square Welded Nut products is argon. The length of the tungsten electrode protruding from the gas nozzle. Cheapest Square Welded Nut products use a vertical power supply with a positive polarity (welding wire connected to the negative pole) when DC. In order to prevent the appearance of welding pores in daily use, the welding parts must be cleaned up if there is rust, oil stains, etc.
Cheapest Square Welded Nut products can be heated or pressurized during welding, and the gap between the nuts can be filled with a filler material, so that a permanent connection between the two nuts can be achieved. Cheapest Square Welded Nut products require internal threads and bolts to cooperate with each other, and internal threads also need to cooperate with mechanical parts such as screws. So that power and movement can be transmitted. However, the balance nut can only be adjusted before the object is weighed.